Roof Installation Guide According to Type

roof installation

Just thinking about how to roof a house might make you feel overwhelmed. However, if you’re ready to put in the time and finances, you can install a simple roof. Anyone who has all of the essential supplies and tools, as well as a strong eye for detail, is roof installation process philippines to install or repair a roof.

Types of roof installation Materials

Before you begin, it’s critical to understand the various roofing materials available for your improper roof installation. Each style of roof has its own advantages in terms of durability, cost, and lifespan. Learn more about them to determine which roof best suits your budget and will provide the best protection for your property.


Roofing felt is a single-ply membrane that protects your roofing for dummies from ice, snow, and rain. It’s simple to install with roofing nails and staples, and it works with any style of shingle or shake roof. Roofing felt is also inexpensive, costing $0.39 per square foot and lasting more than 20 years.

Gravel and Tar

In the early ages, flattened stone was caked together with tar and gravel to form a roof. These two materials combine waterproofing and corrosion resistance in the modern world. They’re big and bulky, but they’re tough. roof installation cost made of tar and gravel cost roughly $4 per square metre and last for over 40 years.


EPDM (Ethylene Propylene Diene Monomer) roofs are inexpensive and thick membranes that most contractors suggest.It can filter UV rays and provide good insulation for only roofing process step by step per square foot. EPDM roofs can also last for more than 30 years.

The Complete Guide to Roofing a House TPO

Thermoplastic polyolefin is a hybrid EPDM membrane that has been reinforced. It creates a watertight seal around your roof that can withstand rain, ice, and snow. It’s also fire-resistant, but it’s a little pricey at $5-$6 and has a 20-year lifespan.


Polyvinyl chloride is a versatile material that can be used for a variety of purposes, including roofing. PVC roofing materials are durable and have a 30-year lifespan, making them ideal for commercial and industrial facilities. They are, however, rather costly, costing between $6 and $10 per square foot.


How can one of the strongest roofing materials be used to roof a building in the simplest way possible? Make use of metal. Roofs made of steel or aluminium can last anywhere from 30 to 50 years. Minor metal roof repairs are simple and quick to complete. However, a square foot of metal roof might cost anywhere between $15 and $60.

The Complete Guide to Roofing a House Asphalt

Asphalt, which is used to build bridges and structural decks, is less expensive than metal but has a 50-year lifespan.
However, because it is hefty and requires particular support joists, its endurance comes at a cost. Asphalt costs between $2.50 and $4.00 per square foot. Look for shingles composed of appealing and durable materials in addition to asphalt shingles and slope seams.

You’ll Need These Tools

To ensure their safety and an effective roofing installation, any professional who knows how to roof a house possesses the following equipment. Before you begin, double-check that you have all of these items.

How to Roof a House in Seven Easy Steps

These are the following steps :

1. Determine Local Building Codes and Obtain Permits

Make sure to check your local building codes for roofing if you live in a house. Only specific materials or a certain quantity of shingles are required in some cities. This is to preserve community visual continuity and to avoid any unpleasant incidents caused by uprooted roofing materials during any potentially violent weather conditions. To prevent any costly local civil code penalties, obtain the necessary building licences before beginning.

Also READ  5G network solutions: make your business go even faster!

2. Locate the Roofing Materials You’ll Require

Take notice of the roofing materials mentioned previously and choose which one is best for your budget and home.
In terms of installation, each material has a different level of difficulty. Before making a decision, assess your roofing installation abilities.Beginners may easily install metal roofs, roofing felt, and shingle-style roofs.

3. Get rid of the old roof (for Pre-Constructed Roofs)

If you’re building a new house and are ready to put the roof on, skip this step. Remove any staples, fasteners, or nails from your old roof with the pry bars.Fill your roofing shovel with the waste you’ve removed. To dislodge the material on an old roof with rusted or hardened screws and fasteners, you’ll need to pound down a pry bar. Take periodic breaks from this taxing activity to place the rubbish in the trash bin with the shovel.

4. Flash Roof Valleys and Install Drip Molding

Rainwater is directed straight to your roof’s gutters via drip parts of roof installation. Bring your roofing nails and a chalk line with you. Align the drip moulds and leave a 12-inch gap between each installation nail. Make a chalk mark in these areas and start nailing. In the same way, nailed down your roof valley flashing.

5. Mark Nail Spacing with Chalk

You’ll need nails to fix roofing felt, synthetic roofs like EPDM, TPO, and PVC, and metal roofs to your roofs. Mark the spots you need to nail with chalk lines in the same way you did with the drip mould. They should be 6 inches apart. Spread your roofing material’s seams around the roof’s surface. Allow for a half-inch overlap to create a waterproof barrier and add insulation.

6. Apply Roof Adhesive to Nails That Are Exposed

Around exposed nails, roofing glue forms a watertight barrier. It also protects them from severe weather that could loosen or uproot them. Apply them evenly on places with exposed nails with the provided application tool.

7. Allow to dry before enjoying your new roof

Before doing a comprehensive post-inspection of your roof, allow the roofing glue to dry. Check for any loose nails, excess roofing seams, regions with cracked adhesive (which require reapplication of the material), and other locations that need to be addressed during this phase. Repeat the process until you’ve addressed all of the potential problems with your roofing installation.

Methods of roof installation

This is possibly North America’s most traditional roofing material. It’s long-lasting, reasonably priced, and comes in a number of colours. One of the best things about asphalt shingles is that you may cover the layer of shingles with new ones instead of having to replace them if you wish to make a change later. Roofing nails should be driven through the tabs right below the sealant line and spaced according to the manufacturer’s directions to fasten the asphalt shingles.

When shingling a roof, start at the edge with a beginning strip, which can be made by cutting the tabs off the first shingle (approximately 6 inches). Then, along the eaves, continue to install full-length starter shingles. Move on to the second course and work your way up the roof, nailing every shingle in place after the beginning strip is complete. Make sure the first shingle of each course is roughly 6 inches narrower than the one below it.

Also READ  How Does High frequency Forex Trading Works?

Roofing Made of Metal

Metal roofing is popular among Roof Installation because, when correctly built, it may last a lifetime. Metal roofing comes in a range of colours and styles, including tiles, shingles, standing-seam panels, and shakes, all of which are available in a variety of colours to match any home. Because it is lightweight, it may be put over an existing roof, considerably reducing installation time.

Metal roofing, while some forms of roofing can be Roof Installation , is best left to the professionals because it requires a variety of tools, unique accessories, and techniques to ensure a perfect new roof installation. Metal roofing is typically installed using one of two methods: a through-fastener system or a clip-fastener system. The first alternative is to use a technique in which the nail or screw used to secure the roofing to the deck also enters the panel. The panels or shingles are attached with specialised clips in the second method, and the bolts are driven through the clips rather than the actual metal roofing.

Cedar shingles

It is normally put one at a time, in single courses. The shingles are usually fastened with two nails, each spaced about one inch from the edges. At all eaves, shingles must be doubled or tripled, with first-course shingles protruding 1-1/2 inches past the fascia for maximum protection and insulation. Joints in any course should be separated by at least 12 inches from joints in neighbouring courses, with a minimum spacing of 14 inches between them. Before installing, please sure to check the manufacturer’s directions for further information and detailed instructions.


Slate roofs are normally more expensive up front than traditional asphalt shingles, but they are a long-term investment because synthetic slates are far more durable and attractive. The installation of a slate system roof takes much longer, and you must be more careful with the material. This is why it is advised that a new roof be installed by a professional business.

Aluminum W flashing is put on each side of the dormer to ensure correct installation. After that, the aluminium is bent into a V shape and shingle covers are attached all over it. Snow guards are also required on some slate roofs to prevent snow from sliding off the roof and causing accidents. The reason for this is that slate tiles, unlike other materials like asphalt, are not porous, hence snow will not be kept on the roof.

Concrete and Clay

Clay roof tiles are popular because of the Mediterranean look they can provide any home. They are also quite robust despite their light weight, making them ideal for homes without a strong roof. To achieve an even roof, make sure the surface is levelled prior to installation. An underlay, usually consisting of asphalt-saturated materials, is placed beneath the shingles to guarantee that the tiles are properly set.

A metal flashing is added around the chimneys after the underlay is installed; vents are located wherever the roof meets a vertical wall. A 10d nail is positioned at the base of the clay tile and into the batten to install the tiles. To ensure stability, place mortar under the first tile. Install another tile at the opposite end of the row, then work your way from each side to the centre.

Check Also : Tech Embracing the Evolving eLearning Landscape for Educators

Visited 59 times, 1 visit(s) today

Add Comment

Click here to post a comment